Prep for every trade credential.
On us.
Free study materials, guided quizzes, and industry-vetted resources for 25+ construction certifications. We don't issue credentials — we help you get ready for the programs that do.
How it works
We strip away the friction between where you are today and the credential you need.
Pick your credential
Browse 11 trade categories and 40+ credentials. Each page tells you the issuing body, what's on the exam, and how long prep typically takes.
Study with guided materials
Work through structured modules, topic reviews, and guided quizzes mapped directly to each credential's official exam content outline.
Connect to an accredited program
When you're ready to sit for the real exam, we'll connect you with accredited training providers and schools. Coming soon — partner network in progress.
All credentials
Tap any credential to see what's covered and get early access when the guide is ready.
Safety & Compliance
OSHA 10 — Construction
The standard entry-level safety card for construction site workers. Covers hazard recognition, fall protection, and electrical basics.
OSHA 30 — Construction
The 30-hour supervisory safety course required on many federal and union jobsites. Deeper dives into OSHA standards, recordkeeping, and leadership responsibilities.
HAZWOPER 40-Hour
Required for workers handling hazardous substances at remediation sites. Covers PPE, site safety plans, and emergency response procedures.
Confined Space Entry
Prepares workers and supervisors for permit-required confined space entry — atmospheric hazards, lockout/tagout, and rescue procedures.
Fall Protection Competent Person
Designates a Competent Person responsible for identifying and correcting fall hazards. Required on most residential and commercial framing projects.
First Aid / CPR / AED
Life-safety basics every site worker should carry. Covers adult/child CPR, AED operation, bleeding control, and medical emergency response.
Electrical
IBEW Apprenticeship Prep
Covers the math, reading comprehension, and basic electrical theory tested on IBEW apprenticeship entrance exams.
Journeyman Electrician Exam Prep
Guided NEC code review, load calculations, and practice exams aligned to the most common state journeyman electrician licensing tests.
Master Electrician Exam Prep
Advanced NEC applications, service sizing, special occupancies, and business law topics tested on master electrician exams nationwide.
NICET Fire Alarm Level I–IV
Structured prep across all four NICET Fire Alarm Systems certification levels — from basic installation through system design and project management.
Plumbing
UA Apprenticeship Prep
Prepares candidates for the UA plumber and pipefitter apprenticeship entrance exam — math, reading, and trade fundamentals.
Journeyman Plumber Exam Prep
Covers IPC/UPC code sections, drainage and venting design, water distribution, and fixture rough-in commonly tested on journeyman plumber exams.
Master Plumber Exam Prep
Advanced pipe sizing, medical gas systems, backflow prevention, and business law for master plumber licensure candidates.
HVAC
EPA 608 Certification
Federal requirement for technicians who work with refrigerants. Covers Type I (small appliances), Type II (high-pressure), Type III (low-pressure), and Universal exams.
NATE Certification
The leading HVAC technician credential. Specialty areas include Air Conditioning, Heat Pumps, Gas Heating, and Air Distribution.
State HVAC License Prep
Jurisdiction-specific prep covering HVAC codes, load calculations, duct design, and refrigeration systems for state licensing exams.
Carpentry & Framing
UBC Carpenter Apprenticeship Prep
Math, blueprint reading, and trade fundamentals to prepare for the UBC apprenticeship application and assessment process.
NCCER Carpentry Modules
Study support for NCCER's standardized carpentry curriculum — hand and power tools, floor systems, wall and ceiling framing, and exterior finishing.
Welding
AWS D1.1 Structural Steel
Prep for the AWS D1.1 Structural Welding Code qualification test — weld joint design, process variables, and inspection criteria.
AWS D1.5 Bridge Welding
Specialized prep for the D1.5 Bridge Welding Code, including fracture-critical requirements, preheat controls, and AASHTO provisions.
Certified Welding Inspector (CWI) Prep
Covers AWS CWI exam Part A (fundamentals), Part B (practical), and Part C (code book) — the most recognized welding inspector credential globally.
Masonry, Concrete & Finishes
ACI Concrete Field Testing
Covers slump, air content, unit weight, and cylinder casting procedures for the ACI Concrete Field Testing Technician Grade I certification.
IMI Masonry Apprenticeship Prep
Blueprint reading, mortar and material basics, and trade math for candidates entering the bricklayer and tile setter apprenticeship programs.
NRCA Roofing Certification
Prep for NRCA ProCertification in low-slope and steep-slope systems — covers system selection, installation procedures, and quality control.
Tile CTEF CTI Prep
Guided prep for the Certified Tile Installer (CTI) hands-on assessment — industry standards, substrate preparation, setting materials, and installation methods.
Heavy Equipment & Operations
NCCCO Crane Operator
Written and practical exam prep for NCCCO mobile crane, tower crane, and overhead crane certifications — load chart reading, rigging, and signal standards.
OSHA Forklift (Powered Industrial Truck)
OSHA 1910.178 / 1926.602 compliance training for forklift operators — pre-operation inspection, safe operating practices, and refueling procedures.
CDL (Class A / B)
Study guides for the CDL general knowledge, combination vehicle, air brakes, and hazardous materials endorsement exams.
Project Management & Quality
Construction Quality Manager (CQM)
The federal CQM-C (Construction Quality Management for Contractors) course required on USACE and NAVFAC projects. Full course content available now.
Certified Construction Manager (CCM) Prep
Comprehensive prep for the CCM examination covering scope, cost, time, quality, safety, and contract administration domains.
AGC Supervisory Training Program
Supervisory skills, scheduling, cost control, and communication fundamentals from the AGC's widely recognized training curriculum.
Associate Constructor (AC) Prep
Exam prep for AIC's Associate Constructor credential — construction technology, management, business, and professional practice fundamentals.
Sustainability & Estimating
LEED Green Associate
Entry point into the LEED credential system. Covers green building principles, LEED rating systems, and sustainability concepts.
LEED AP BD+C
Advanced credential for professionals overseeing LEED-certified building design and construction projects. Covers all BD+C credit categories in depth.
AACE Certified Cost Professional (CCP)
Rigorous prep for the CCP exam covering estimating, cost control, planning and scheduling, project risk analysis, and forensic analysis.
ASPE Certified Professional Estimator (CPE)
Study materials and practice exams for the CPE designation — the only nationally recognized certification specifically for construction estimators.
Government & Federal
NAVFAC CQM-C
Navy-specific Construction Quality Management for Contractors course — required for prime and subcontractors on NAVFAC projects.
USACE Construction Quality Management
Army Corps of Engineers CQM-C certification prep — three-phase control, submittal management, and QC plan requirements.
Davis-Bacon Prevailing Wage Compliance
Practical guide to Davis-Bacon Act requirements — wage determinations, certified payroll (WH-347), fringe benefits, and DOL audit readiness.
Frequently asked questions
Do you actually issue these credentials?
No. We provide free prep materials and guided quizzes. The actual certifications come from the issuing bodies listed on each credential page — OSHA, AWS, USGBC, CMAA, state licensing boards, and so on.
Is this really free?
Yes, forever, for the core study materials and quizzes. We may add advanced labs or instructor-led programs with partner schools in the future — those will always be clearly marked and separate from the free content.
How do I track my progress?
Sign up for a free Construct-PM account. Your study progress saves across devices so you can pick up exactly where you left off.
Can I list my school or training program here?
Yes — we're actively signing partner training providers. Email partnerships@construct-pm.com and tell us which credentials you offer.
What about CE credits?
We don't issue continuing education credits directly; partner schools do. Each credential page will list CE-accredited partners as they come on board.
Ready to start studying?
Create a free account to save your progress across devices and get early access to new credential guides as we publish them.
Create free accountNo credit card required. Core study materials are always free.